Skip to main content

Install the front door

Use this information to install the front door.

Before installing the front door:

  1. Before installing the front door, if the server comes with rubber blocks to cover the holes for installing the front door, remove the rubber blocks first. Store the rubber blocks in case that you later remove the front door and need the rubber blocks to cover the holes in the front bezel.

To install the front door, complete the following steps:

  1. Align the two hooks on the front door with the corresponding holes in the front bezel; then, move the front door inward and then pull it slightly downward until it is secured in place by the hooks.
    Figure 1. Front door installation
    Front door installation
  2. Close the front door.

After installing the front door:

Complete the parts replacement. See Complete the parts replacement

Demo video

Watch the procedure on YouTube