Complete the parts replacement
Use this information to complete the parts replacement.
Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.
Properly route and secure the cables in the server. Refer to the cable connecting and routing information for each component.
If you have removed the front bezel, reinstall it. See Install the front bezel
If you have removed the front door, reinstall it. See Install the front door.
If you have removed the top cover, reinstall it. See Install the server cover.
Lock the server cover and server front door (available on some models) to ensure the security. See Server locks.
- Reconnect external cables and power cords to the server.AttentionTo avoid component damage, connect the power cords last.
If necessary, install the server in the rack.
Update the server configuration if necessary.
Download and install the latest device drivers: Lenovo Data Center Support
Update the system firmware. See Firmware updates.
Use the Lenovo XClarity Provisioning Manager to update the UEFI configuration. For more information, see: http://sysmgt.lenovofiles.com/help/topic/LXPM/UEFI_setup.html
Use the Lenovo XClarity Provisioning Manager to configure the RAID if you have installed or removed a hot-swap drive, a RAID adapter, or the M.2 backplane and M.2 drive. For more information, see: http://sysmgt.lenovofiles.com/help/topic/LXPM/RAID_setup.html