System board jumpers

The following illustration shows the location of the jumpers on the server.

Figure 1. System board jumpers

Table 1. Jumper description

Jumper name	Jumper setting
1 NCSI functional header jumper	Pins 1&2: Default Pins 2&3: Disable
2 Power permission override jumper	Pins 1&2: Default Pins 2&3: Enable
3 Clear CMOS jumper	Pins 1&2: Default Pins 2&3: CMOS clear
4 TPM presence header jumper	Pins 1&2: Default Pins 2&3: TPM presence asserted
5 IMM force update jumper	Pins 1&2: Default Pins 2&3: Enable

Important

• Before you move the jumpers, turn off the server; then, disconnect all power cords and external cables. Do not open your server or attempt any repair before reading and understanding the following information:

  • Safety Information page

  • Handling static-sensitive devices

• Any system-board switch or jumper block that is not shown in the illustrations in this document are reserved.