Skip to main content

System configuration

Complete these procedures to configure your system.

Note

Some Lenovo systems management applications, including XClarity Administrator, XClarity Controller, XClarity Energy Manager, and XClarity Essentials, are not supported by ST50 V2.

  • Update the firmware
    Go to Lenovo Datacenter Support site for the latest firmware update package.
  • Configure the firmware
    Read this section to learn about how to set up the firmware for the server.
  • Memory configuration
    Memory performance depends on several variables, such as memory mode, memory speed, memory ranks, memory population and processor.
  • RAID configuration
    Using a Redundant Array of Independent Disks (RAID) to store data remains one of the most common and cost-efficient methods to increase server's storage performance, availability, and capacity.
  • Deploy the operating system
  • Back up the server configuration
    After setting up the server or making changes to the configuration, it is a good practice to make a complete backup of the server configuration.
  • Update VPD (Vital Product Data)
    VPD (Vital Product Data) must be updated after the system board is replaced.