Configure the firmware
Read this section to learn about how to set up the firmware for the server.
- Starting the Setup Utility program
Follow this procedure to start the Setup Utility program. - Changing the display language of the Setup Utility program
The Setup Utility program supports three display languages: English and simplified Chinese. - Enabling or disabling a device
This section provides information about how to enable or disable hardware devices, such as USB connectors or storage drives. - Enabling or disabling the automatic power-on
Automatic Power On in Setup Utility program provides various power-on options. - Acoustic/Thermal optimal performance
Intelligent Cooling Performance Mode menu allows you to adjust server performance to achieve optimal acoustic or thermal conditions. - Enabling or disabling thermal alert logs (Windows only)
When the ICE thermal alert is enabled, an alert log is generated in the Windows system log when a critical thermal situation occurs. The alert log helps identify thermal problems, such as malfunctioning fans, abnormally high temperature, or poor cooling performances. - Configuration change detection
With configuration-change detection enabled, an error message is displayed in POST when configuration changes of some hardware devices (such as storage drives or memory modules) are detected. - Changing BIOS settings before installing a new operating system
BIOS settings vary by operating system. Change BIOS settings before installing a new operating system. - Using passwords
Passwords can be set to prevent unauthorized access to the server. - Selecting a startup device
If the server does not start up from the expected device, you can either change the startup device sequence or select a temporary startup device. - Exiting the Setup Utility program
Follow this procedure to exit the Setup Utility program.
Give documentation feedback