Parts list
Use the parts list to identify each of the components that are available for your server.

Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.
Consumable and Structural parts: Purchase and replacement of consumable and structural parts is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
| Index | Description | Tier 1 CRU | Tier 2 CRU | FRU | Consumable and Structural parts |
|---|---|---|---|---|---|
For more information about ordering the parts shown in Figure 1: | |||||
| 1 | Chassis | √ | |||
| 2 | Optical drive | √ | |||
| 3 | LTO/RDX tape drive | √ | |||
| 4 | Drive bay adapter for hard-disk/solid-state drive | √ | |||
| 5 | Drive bay filler and metal shield | √ | |||
| 6 | Drive bay adapter for slim optical drive and hard-disk/solid-state drive | √ | |||
| 7 | Slim optical drive | √ | |||
| 8 | Front bezel | √ | |||
| 9 | Front panel | √ | |||
| 10 | Thermal sensor | √ | |||
| 11 | Front fan | √ | |||
| 12 | 2.5-inch simple-swap drive in the retainer | √ | |||
| 13 | 3.5-inch simple-swap drive in the retainer | √ | |||
| 14 | Flash power module retainer | √ | |||
| 15 | Flash power module | √ | |||
| 16 | PCIe adapter | √ | |||
| 17 | DIMM | √ | |||
| 18 | Dual SD card adapter | √ | |||
| 19 | SD card | √ | |||
| 20 | System board | √ | |||
| 21 | CMOS battery (CR2032) | √ | |||
| 22 | Processor | √ | |||
| 23 | Heat sink and fan module | √ | |||
| 24 | Rear fan | √ | |||
| 25 | Intrusion switch | √ | |||
| 26 | Server cover | √ | |||
| 27 | Power supply unit | √ | |||