Skip to main content

Install the foot stands

Use this information to install the foot stands.

Read the installation Guidelines

To install the foot stands, complete the following steps:

Watch the procedure
  • A video of this procedure is available at YouTube

  1. Lay the server on its side for easier operation.
  2. For each foot stand, carefully insert the two tabs on the foot stand into the corresponding holes in the chassis. Then, pivot the foot stand inward until the other side clicks into place.
    Figure 1. Foot stand installation
    Foot stand installation

    Important
    To help the server stand steadily, ensure that the foot stands are installed outward as shown in Front view.