Skip to main content

Install the front bezel

Use this information to install the front bezel.

About this task

S033
240VA shock hazard
CAUTION

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

Attention
  • Read Installation guidelines to ensure that you work safely.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

Install the front bezel.
Figure 1. Front bezel installation
Front bezel installation
  1. Align the three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis.
  2. Pivot the front bezel inward until it snaps into position on the left side.

After you finish

  1. Reinstall the security door. See Install the security door.

  2. Reinstall the server cover. See Install the server cover.

  3. Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube