ThinkAgile CP6000 series overview

The Lenovo ThinkAgile CP6000 series offering can be scaled up to 40 compute nodes to support mainstream enterprise workloads and mixed-workload environments.

The Lenovo ThinkAgile CP6000 series consists of the following components:

• Storage block

• Compute block

• Interconnect switch

• Management switch

• Services

• Software

Storage block

• 1 Storage Block - a maximum 5 blocks (SB-D20)

• Dual controller - 2CPU per controller

• 8x SFP Base-T SFP+ adapters

• 8x CAT6 cables per storage block, 1.5m and other lengths permitted

• 64 GB RAM per controller

• 8, 16, 24 drives (8 drives per drive pack)

• 1.6 TB, 3.2 TB, 6.4 TB NVMe drives per controller

• Drives must be consistent within a controller

• Dimensions: 87.6 x 446.4 x 857.2 mm (3.4 x 17.6 x 33.7 inches)

• Maximum weight: 42.0 kg (92.6 lb)

Compute block

• 1 D2 enclosure, fully populated PSU, fan, 220V with 10Gb SFP+ network module — maximum 10 enclosure

• Minimum 2 SD530 nodes, default 4, maximum 40 nodes

• 128 GB, 256 GB, 384 GB, 512 GB, 768 GB, 1024 GB RAM

• 8+ cores per CPU, 1-2 sockets filled AXQT, and others

• 2x SFP+ DAC cables per node, 1.5m and other lengths permitted

• Boot: 1x SATA 240 GB

• Dimensions: 41.0 x 562.0 x 222.0 mm (1.7 x 22.2 x 8.8 inches)

• Maximum weight: 55 kg (121.2 lbs)

Interconnect switch

• 2 CP-I-10 Interconnect switches

• 48x 10 Gb SFP+ fabric ports

• 6x 40 Gb QSFP+ fabric ports

• Dimensions: 438.4 x 473 x 43.4 mm (17.26 x 18.62 x 1.71 inches)

• Maximum weight: 8.95 kg (19.73 lb), with two installed PSUs

Management switch

Lenovo ThinkSystem NE0152T RackSwitch

Note

A dedicated out-of-band (OOB) management switch is required for this solution. If the Lenovo NE0152T is not used, you must provide an OOB management switch with the correct configuration.

Services

Lenovo Deployment Services are mandatory

Lenovo Hardware Installation Service is optional

Software

Software is preloaded on compute, storage, and switch.