ThinkAgile CP4000 series overview
The Lenovo ThinkAgile CP4000 series scales as an initial data-management footprint for managed service provider and cloud service provider environments that start on a smaller scale but are poised for growth. The CP4000 series also supports business continuity when deployed remotely as an off-site backup for disaster recovery.
Storage block
1 Storage Block (SB-S10)
Dual controller - single CPU per controller
8x SFP Base-T SFP+ transceivers
8x CAT6 cables, 1.5m and other lengths permitted
2x CAT5e cables, 1.5m and other lengths permitted
32 GB RAM per controller
8, 16, 24 drives (8 drives per drive pack)
800 GB, 1.6 TB NVMe drives per controller
Drives must be consistent within a storage block
Dimensions: 87.6 x 446.4 x 857.2 mm (3.4 x 17.6 x 33.7 inches)
Maximum weight: 42.0 kg (92.6 lb)
Compute block
1 D2 enclosure, fully populated PSU, fan, 220V with 10Gb SFP+ network module
Minimum 2 SD530 nodes, maximum 4 nodes
128 GB, 256 GB RAM per node
8+ cores per CPU, 1-2 sockets filled AXQT, and others
2x SFP+ DAC cables per node, 1.5m and other lengths permitted
Boot: 1x SATA 240 GB
Dimensions: 41.0 x 562.0 x 222.0 mm (1.7 x 22.2 x 8.8 inches)
Maximum weight: 55 kg (121.2 lb)
Interconnect switch
1 or 2 CP-I-10 interconnect switches
48x 10 Gb SFP+ fabric ports
6x 40 Gb QSFP+ fabric ports
Dimensions: 438.4 x 473 x 43.4 mm (17.26 x 18.62 x 1.71 inches)
Maximum weight: 8.95 kg (19.73 lb), with two installed PSUs
Management switch
Lenovo ThinkSystem NE0152T RackSwitch
A dedicated out-of-band (OOB) management switch is required for this solution. If the Lenovo NE0152T is not used, you must provide an OOB management switch with the correct configuration.
Software
Software is preloaded on compute, storage, and switch.