Install the storage enclosure

Procedures for installing ThinkAgile CP storage enclosure in a rack.

To install the ThinkAgile CP storage enclosure on the slide rails, do the following:

CAUTION

Ensure that at least two people lift and install the enclosure together.

1. Remove both of the side covers on the enclosure by grasping and pulling out the bottom of each side cover, and then pulling it straight up.
   Figure 1. Removal of side cover
   
   
2. Lift the enclosure and slowly place the enclosure on the rail.
3. Carefully slide the enclosure into the rack along the rails until the enclosure is fully inserted.
   Figure 2. Installing the enclosure into the rack
   
   
4. Secure the enclosure with the thumbscrews and the M5 screws on the front.
   Figure 3. Installing screws on front of enclosure
   
   
5. On each side of the storage enclosure, fit the hook on the top of the side cover and push the bottom of it inward to reinstall the side cover to the storage enclosure.
   Figure 4. Reinstalling the side cover
   
   

The installation of the storage block in a rack is now complete.