Skip to main content

Start storage array iSNS server refresh

The start storageArray isnsServerRefresh command initiates a refresh of the network address information for the iSNS server.

Supported Arrays​

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles​

To execute this command on an storage array, you must have the Storage Admin role.

Context​

If the DHCP server is marginal or unresponsive, the refresh operation can take from two to three minutes to complete.

Note

This command is for IPv4 only.

Syntax​

start storageArray isnsServerRefresh

Parameter​

None.

Notes​

If you used the set storageArray isnsIPv4ConfigurationMethod command to set the configuration but did not set the configuration to DHCP, running the start storageArray isnsServerRefresh returns an error.