Skip to main content

Reset storage array iSCSI baseline

The reset storageArray iscsiStatsBaseline command resets the iSCSI baseline to 0 for the storage array.

Supported Arrays​

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles​

To execute this command on an storage array, you must have the Storage Admin role.

Important
This command is deprecated and is replaced by the Reset storage array host port statistics baseline command.

Syntax​

reset storageArray iscsiStatsBaseline

Parameters​

None.

Notes​

This command resets the baseline to 0 for both controllers in the storage array. The purpose of resetting both of the controller baselines is to help make sure that the controller counts are synchronized between the controllers. If one controller resets but the second controller does not reset, the host is informed that the controllers are out of synchronization. The host is informed by the time stamps that are reported with the statistics.