Skip to main content

HTTP Boot Configuration

Note

  • When you enable Network -> Network Stack Setting -> IPv4 HTTP Support or IPv6 HTTP support, HTTP Boot Configuration will be displayed in Network page.

  • When the network adapter is installed in the system, you will see the submenu, or nothing will be displayed underHTTP Boot Configuration.

Table 1. HTTP Boot Configuration
ItemDescription

List of NICs in the system

Example:

MAC:XX:XX:XX:XX:XX:XX HTTP Boot Configuration

Configure the HTTP Boot parameters. (MAC: XXXXXXXXXXXX).

Note

After you input the information to create the new http boot option, you need to save it from the front-page -System Configuration and Boot Management -> Save Settings, then you will see the boot option in Start Options.