Skip to main content

Installing the bezel

Use this information to install the bezel.

Before you install the bezel, read Safety and Installation guidelines.

If the compute node came with a RFID tag attached to the bezel, you must obtain and install a replacement RFID tag.

To install the bezel, complete the following steps.


Graphic illustrating the installation of a SAS hot-swap storage drive

  1. Position the bezel on the front of the compute node.
  2. Press the bezel securely against the chassis.
    Note
    Make sure that the bezel is pressed flat against the chassis around the power button, to maintain access to the power button.