Removing and replacing Tier 1 customer replaceable units (CRUs)
Use this information for removing and replacing Tier 1 CRUs.
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
- Removing the adapter-retention assembly
Use this information to remove the adapter-retention assembly. - Installing the adapter-retention assembly
Use this information to install the adapter-retention assembly. - Removing the bezel
Use this information to remove the bezel. - Installing the bezel
Use this information to install the bezel. - Removing the ID label plate
Use this information to remove the identification (ID) label plate from the front panel. - Installing the ID label plate
Use this information to install the identification (ID) label plate on the front panel. - Removing the CMOS battery
Use this information to remove the CMOS battery. - Installing the CMOS battery
Use this information to install a CMOS battery. - Removing a DIMM
Use this information to remove a dual inline memory module (DIMM). - Installing a DIMM
Use this information to install a DIMM. - Removing a fabric connector
Use this information to remove a fabric connector. - Installing a fabric connector
Use this information to install a fabric connector. - Removing the hard disk drive backplane
Use this information to remove the hard disk drive backplane. - Installing the hard disk drive backplane
Use this information to install the hard disk drive backplane. - Removing a hot-swap hard disk drive
Use this information to remove a hot-swap hard disk drive. - Installing a hot-swap hard disk drive
Use this information to install a hot-swap hard disk drive. - Removing an interposer cable
Use this information to remove an interposer cable. - Installing an interposer cable
Use this information to install an interposer cable. - Removing an I/O expansion adapter
Use this information to remove an I/O expansion adapter. - Installing an I/O expansion adapter
Use this information to install an I/O expansion adapter. - Removing the light path diagnostics panel
Use this information to remove the light path diagnostics panel. - Installing the light path diagnostics panel
Use this information to install the light path diagnostics panel. - Removing the RFID tag
Use this information to remove the RFID tag from the bezel. - Installing the RFID tag
Use this information to install the RFID tag on the front panel. - Removing the USB enablement kit
Use this information to remove the USB enablement kit. - Installing the USB enablement kit
Use this information to install the USB enablement kit. - Removing the USB flash drive
Use this information to remove the USB flash drive. - Installing the USB flash drive
Use this information to install the USB flash drive.
Give documentation feedback