Skip to main content

Removing the bezel

Use this information to remove the bezel.

Before you remove the bezel, read Safety and Installation guidelines.

If you are replacing the bezel, remove the ID label plate that has machine type and serial number information from the bezel and set it aside (see Removing the ID label plate).
Note
If your compute node has an RFID tag, it is already attached to the ID label plate.

To remove the bezel, complete the following steps.
Graphic illustrating removal of the bezel

  1. Use a flat-blade screwdriver to carefully pull the bezel from the compute node.
  2. Lift the bezel from the compute node.

If you are instructed to return the bezel, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.