Skip to main content

Front USB module and operator information panel cable connection

This topic provides information about the internal cable routing for the front USB module and the operator information panel.

Note

  • Ensure that the cable is not pinched and does not cover any connectors or obstruct any components on the system board.

  • Ensure the relevant cables pass through the cable clips.

  • 1: Press the release latch and connect to the front USB connector on the system board.

  • 2

    : Press evenly on the release latches and connect to the operator information panel connector on the system board.
Figure 1. Operator information panel cable connection
Operator information panel cable connection