806f011b-0c01ffff : The connector [PhysicalConnectorElementName] has encountered a configuration error. (FP LCD Cable)
The connector [PhysicalConnectorElementName] has encountered a configuration error. (FP LCD Cable)
This message is for the use case when an implementation has detected an Interconnect Configuration Error.
May also be shown as 806f011b0c01ffff or 0x806f011b0c01ffff
Severity
Error
Alert Category
Critical - Other
Serviceable
Yes
SNMP Trap ID
50
Automatically Notify Support
Yes
User Response
- Check system event log is showing LCD cable sensor has deasserted.
- Reseat LCD cable on the system board.
- Reset LCD cable on LCD panel.
- Replace LCD cable.
Give documentation feedback