Skip to main content

166-908-001 : IMM I2C Test Failed

IMM I2C Test Failed

Internal Event​

No

Severity​

Error

Serviceable​

Yes

Recoverable​

No

Automatically Notify Support​

No

User Response​

Perform the actions mentioned one at a time and try the test after each action:

  1. Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.
  2. Make sure that DSA and BMC/IMM are at the latest level.
  3. Run the test again.
  4. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.

Date Message Added​

10/29/2013

Reviewed​

10/29/2013