Skip to main content

180-801-000 : Check-point Panel Test Aborted

Check-point Panel Test Aborted

Internal Event

No

Severity

Warning

Serviceable

Yes

Recoverable

No

Automatically Notify Support

No

User Response

Complete the following steps:

  1. Inspect and reseat operator information panel cable at both ends.
  2. Verify that the Baseboard Management Controller (BMC) is working.
  3. Run the test again.
  4. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.

Date Message Added

08/29/2012

Reviewed

08/29/2012