Skip to main content

180-901-000 : Check-point Panel Test Failed

Check-point Panel Test Failed

Internal Event

No

Severity

Error

Serviceable

Yes

Recoverable

No

Automatically Notify Support

No

User Response

Complete the following steps:

  1. Check the operator information panel cabling for loose or broken connections at both ends or damage to the cable.
  2. Replace the information panel cable if damage is present.
  3. Run the test again.
  4. Replace the operator information panel assembly.
  5. Run the test again.
  6. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.

Date Message Added

08/29/2012

Reviewed

08/29/2012