본문으로 건너뛰기

201-901-002 : Standalone Memory Test Failed

Standalone Memory Test Failed

Severity

Error

Serviceable

Yes

Recoverable

No

Automatically Notify Support

No

User Response

Complete the following steps:

  1. Perform the actions mentioned one at a time and try the test after each action.
  2. If the problem remains, contact your technical-service representative.
  3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
  4. Make sure that DSA and BIOS/uEFI are at the latest level.
  5. Replace any DIMMS(s) mentioned in error, one by one.
  6. Make sure that all DIMMs are enabled in the Configuration/Setup Utility program.
  7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.