본문으로 건너뛰기

215-801-000 : Optical Drive Test Aborted

Optical Drive Test Aborted

Severity

Warning

Serviceable

Yes

Recoverable

No

Automatically Notify Support

No

User Response

Complete the following steps:

  1. Make sure that the DSA Diagnostic code is at the latest level.
  2. Run the test again.
  3. Check the drive cabling for loose or broken connections at both ends or damage to the cable. Replace the cable if damage is present.
  4. Run the test again.
  5. Check system firmware level and upgrade if necessary.The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
  6. Run the test again.