Skip to main content

temps command

This command displays all temperature and temperature threshold information.

Use the temps command to display all the temperatures and temperature thresholds. The same set of temperatures are displayed as in the web interface.

Syntax:
temps
Example:
system> temps
Temperatures are displayed in degrees Fahrenheit/Celsius
              WR          W     T            SS            HS
------------------------------------------------------------------------
Ambient Temp  109.40/43   N/A   78.80/26.00  109.40/43.00  122.00/50.00
Exhaust Temp  N/A         N/A   32.00/0 .00  116.60/47.00  N/A
system>

Note
  1. The output has the following column headings:
    • WR: warning reset (Positive-going Threshold Hysteresis value)
    • W: warning (Upper non-critical Threshold)
    • T: temperature (Current value)
    • SS: soft shutdown (Upper critical Threshold)
    • HS: hard shutdown (Upper non-recoverable Threshold)
  2. All temperature values are in degrees Fahrenheit/Celsius.
  3. N/A represents not applicable.