Skip to main content

Service Enablement and Port Assignment

Use the information in this topic to view or change the port numbers used by some services on the XClarity Controller.

Click Network under BMC Configuration to view or modify XClarity Controller port assignments. Complete the following fields to view or modify port assignments:
HTTPS (Web/Redfish)
This item is always Enabled. In this field specify the port number for Web Over HTTPS. The default value is 443.
Remote Presence
This item is always Enabled. The port number is 443.
IPMI over LAN
The port number is 623. This field is not user-configurable.
Note
Ensure that IPMI over LAN is selected and applied at the User Accessible Interface field for the corresponding user in the User/LDAP page.
SSDP
The port number is 1900. This field is not user-configurable.
SSH
In this field specify the port number that is configured to access the command line interface through the SSH protocol. The default value is 22.
SNMP Agent
In this field specify the port number for the SNMP agent that runs on the XClarity Controller. The default value is 161. Valid port number values are from 1 to 65535.
Note
Ensure that SNMP is selected and applied at the User Accessible Interface field for the corresponding user in the User/LDAP page.