Installing a blade handle

Use these instructions for information about how install a blade handle.

To install a blade handle, complete the following steps:

1. Orient the blade server with the cover side down and the bezel towards you.
2. Locate where you will be installing the blade handle.
   Note

   The left handle and right handle are not the same part. To identify where the blade handle should be installed, see the illustration and parts listing provided in Parts listing.
3. Orient the blade handle so that the blue release latch is towards the middle of the blade server.
4. Align the hole in the blade handle with the hole on the blade server where the handle will be installed.
5. Use a screwdriver to install the screw that secures the blade handle to blade server. It is recommended to install the screw that was removed when the blade handle was removed.
6. Install the blade server into the BladeCenter unit (see Installing the blade server in a BladeCenter unit).