Removing and replacing Tier 1 CRUs
Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing the air baffle
When you work with some optional devices, you must first remove the air baffle to access certain components or connectors on the system board. The following illustration shows how to remove the air baffle. - Replacing the air baffle
Use this information to replace the air baffle. - Removing the power paddle module
Use this information to remove the power paddle module. - Replacing the power paddle module
Use this information to install the power paddle module. - Removing the front USB assembly
Use this information to remove the front USB assembly. - Replacing the front USB assembly
Use this information to replace the front USB assembly. - Removing a hot-swap hard disk drive
Use this information to remove a hot-swap hard disk drive. - Replacing a hot-swap hard disk drive
Use this information to install a hot-swap hard disk drive. - Removing a memory module
Use this information to remove a memory module. - Installing a memory module
The following notes describe the types of DIMMs that the server supports and other information that you must consider when you install DIMMs. - Removing the fan cage assembly
Use this information to remove the fan cage assembly. - Replacing the fan cage assembly
Use this information to replace the fan cage assembly. - Removing a hot-swap fan
Use this information to remove a hot-swap fan. - Replacing a hot-swap fan
Use this information to replace a hot-swap fan. - Removing the media cage (also called lightpath LCD operation panel assembly)
Use this information to remove the media cage (also called lightpath LCD operation panel assembly). - Replacing the media cage (also called lightpath LCD operation panel assembly)
Use this information to replace the media cage (also called lightpath LCD operation panel assembly). - Removing a riser-card assembly
Use this information to remove a riser-card assembly. - Replacing a riser-card assembly
Use this information to replace a riser-card assembly. - Removing the dedicated slotless HBA controller
Use this information to remove the dedicated slotless HBA controller. - Replacing the dedicated slotless HBA controller
Use this information to replace the dedicated slotless HBA controller. - Removing an adapter
Use this information to remove an adapter. - Replacing an adapter
Use this information to replace an adapter. - Removing an EIA assembly
Use the following instructions to remove an EIA assembly for 2.5-inch and 3.5-inch models. - Replacing an EIA assembly
Use the following instructions to replace an EIA assembly for 2.5-inch and 3.5-inch models. - Removing a hot-swap ac power supply
Use this information to remove a hot-swap ac power supply. - Replacing a hot-swap ac power supply
Use this information to replace a hot-swap ac power supply. - Removing the 2.5-inch hot-swap hard disk drive backplane
Use this information to remove the 2.5-inch hot-swap hard disk drive backplane. - Replacing the 2.5-inch hot-swap hard disk drive backplane
Use this information to replace the 2.5-inch hot-swap hard disk drive backplane. - Removing the 3.5-inch hot-swap hard disk drive backplane
Use this information to remove the 3.5-inch hot-swap hard disk drive backplane. - Replacing the 3.5-inch hot-swap hard disk drive backplane
Use this information to replace the 3.5-inch hot-swap hard disk drive backplane. - Removing the coin-cell battery (also called CMOS battery)
The following notes describe information that you must consider when replacing the battery. - Replacing the coin-cell battery (also called CMOS battery)
The following notes describe information that you must consider when replacing the coin-cell battery in the server. - Removing the LCD system information display panel
Use this information to remove the LCD system information display panel. - Replacing the LCD system information display panel
Use this information to replace the LCD system information display panel. - Removing the operator information panel assembly
Use this information to remove the operator information panel assembly. - Replacing the operator information panel assembly
Use this information to replace the operator information panel assembly.
Give documentation feedback