Description of SMM3 functions on web interface
The information in this topic explains the SMM3 functions on the web interface.
The following is a table that describes the System Management Module 3 functions in the left navigation panel.
| Tab | Selection | Description |
|---|---|---|
| Home | Enclosure status | Show enclosure health information. |
| Node status | Show the number of nodes installed in the enclosure and the number of powered-on nodes. | |
| Power status | Show system power usage status. | |
| Enclosure Information | Show enclosure product name, machine type, hostname, network information and firmware version. | |
| Quick Actions | Provide enclosure and SMM3 quick actions. | |
| Nodes Information | Provide enclosure installed nodes information. | |
| Events | Event logs | The Event Log page displays entries that are currently stored in the SMM event log. All events in the log are time stamped, using the SMM date and time settings. Some events also generate alerts, if they are configured to do so. You can sort and filter events in the event log and export them to a file. |
| Audit Logs | The Audit Log page displays entries that are currently stored in the SMM audit log. The log includes a text description of system events that are reported and remote access attempts. | |
| Debug logs | Generate and download the debug log for advance service support. | |
| Notification | Include PEF configuration for sent notification condition. This page allows you to manage who will be notified of system events. It allows you to configure Email/SNMPv2c recipient. You can also generate a test event to verify notification feature operation. Edit trap receiver and email receiver while PEF condition happened. | |
| Systems | Inventory | The inventory page displays the all the components in the system, along with their status and key information. You can click on a device to display additional hardware information for it. |
| Nodes | Show enclosure node information, include XCC IP, power status and restore policy. Provide restart XCC3 or reseat node action. | |
| Voltage | Display system voltage relative sensor. | |
| Cooling | Show cooling configuration and Leakage sensor status | |
| Power | Power Overview | Show Power relative information. |
| Power Meter | Displays PCSs status and related power data. | |
| Power configuration | Configure PCS policy. Allow user to configure the power redundancy mode. | |
| Power Capping | Edit entire enclosure power capping and node power capping. | |
| Operations | Firmware | The Server Firmware page displays firmware information and allows you to update the SMM or PCS firmware. |
| Enclosure and SMM | Support enclosure virtual reset, SMM restart, SMM locator led control and some information. | |
| Session | Configure maximum session number and timeout value. List all session connect to this SMM system. | |
| Setting | User | List all available user. It allows you to add/edit/delete local user. Configure advance user setting, which includes password complex rule and lock out user period, etc. |
| Network interface | SMM network interface information, include IPv4, IPv6 Configuration. | |
| Network service | It allows you add/replace HTTPS configuration, enable/disable IPMI service and setup SMTP server configuration. | |
| Backup and restore | Allow you to backup or restore SMM configuration and VPD info and reset the configuration of the SMM to the factory defaults. Attention When you click | |
| Date and time | Configure SMM date and time |
Give documentation feedback