Skip to main content

Replacing the filler on to the GPU tray

Use this information to install the filler on to the GPU tray.

Before you install the filler from the GPU tray, complete the following steps:
  1. Read Safety and Installation guidelines.
  2. If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see Removing a compute node from a chassis for instructions).
  3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.

To install the filler on to the GPU tray, complete the following steps:

  1. Remove the cover (see Removing the compute node cover).
  2. Align the filler with the bracket on the middle of the GPU tray; then, lower the filler into the GPU tray. Press the filler down until it is securely seated.
    Figure 1. Filler installation
    Filler installation
  3. Reinstall the cover (see Installing the compute node cover).
  4. Slide the compute node into the rack.
  5. Reconnect the power cords and any cables that you removed.
  6. Turn on the peripheral devices and the compute node.