FQXPMCL0002K : Failed to read Deployment Manager Signature from USB.

Severity​

Warning

User Action​

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via BMC setting under uEFI setup on LXPM left panel. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Clone the image over and retry the operation.

5. Perform AC reset or virtual reseat.

   Note

   When performing AC reset, after powering off AC, wait several seconds before powering on AC. After AC power is restored, power on the host system.

6. If the problem persists, contact technical support.