Fan cable routing
Follow instructions in this section to route the cables for the fan.
Note
- Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
- When routing the cables, make sure that all cables are routed appropriately through the corresponding cable guides and cable clips.
- Manage redundant fan cables as shown in the illustration.
Figure 1. Fan cable routing
| From (fan) | To (system board) | Cable length |
|---|---|---|
| 1 Fan 1 cable | Fan 1 connector | 140 mm |
| 2 Fan 2 cable | Fan 2 connector | 140 mm |
| 3 Fan 3 cable | Fan 3 connector | 140 mm |
| 4 Fan 4 cable | Fan 4 connector | 140 mm |
Give documentation feedback