Skip to main content

Install the cable management arm

Use this procedure to install the cable management arm.

Before you install the cable management arm:
  1. Read the following section(s) to ensure that you work safely.
  2. Make sure the enclosure is pushed fully into the rack and the thumbscrews are tightened.

Complete the following steps to install the cable management arm.

Figure 1. Cable management arm installation
Cable management arm installation

  1. Align the inner mounting clip with the inner tab on the slide, then, push it until it snaps into place.
  2. Align two outer mounting clips with the outer tabs on the slides; then, push them until they snap into place.