Skip to main content

Node technical specifications

Summary of the technical specifications of the node. Depending on the model, some features might not be available, or some specifications might not apply.

Processor​

Processor

Supports fourth-generation AMD® EPYCTM processors, with 5nm process technology.

  • One processor with the new LGA 6096 (SP5) socket
  • Up to 128 cores
  • Maximum Configurable Thermal Design Power (cTDP): up to 400 watts

For a list of supported processors, see: Lenovo ServerProven website.

Memory​

Memory

See Memory module installation rules and order for detailed information about memory configuration and setup.

  • Slots: 12 memory module (DIMM) slots
  • Memory module type:
    • 16GB TruDDR5 4800MHz (1Rx8) RDIMM-A
    • 24GB TruDDR5 4800MHz (1Rx8) RDIMM-A
    • 32GB TruDDR5 4800MHz (2Rx8) RDIMM-A
    • 32GB TruDDR5 4800MHz (1Rx4) 10x4 RDIMM-A
    • 48GB TruDDR5 4800MHz (2Rx8) RDIMM-A
    • 64GB TruDDR5 4800MHz (2Rx4) 10x4 RDIMM-A
    • 96GB TruDDR5 4800MHz (2Rx4) RDIMM-A
    • 128GB TruDDR5 4800MHz (2S2Rx4) 3DS RDIMM-A v2
  • Capacity:
    • Minimum: 16 GB (1 x 16 GB RDIMM)
    • Maximum: 1536 GB (12 x 128 GB RDIMMs)
  • Speed:
    • The operating speed varies with specific processor models and UEFI settings.
    • Maximum speed: 4800 MT/s

For a list of supported memory modules, see: Lenovo ServerProven website.

M.2 Drive​

M.2 Drive
  • Up to two M.2 drives on the system board.
    • The following form factors are supported:

      • 80 mm (2280)

      • 110 mm (22110)

  • Up to two M.2 drives on M.2 boot adapter.
    • The following form factors are supported:

      • 42 mm (2242)

      • 60 mm (2260)

      • 80 mm (2280)

      • 110 mm (22110)

  • The system supports M.2 drives with the following capacity:
    • SATA M.2 drive:
      • 240 GB
      • 480 GB
      • 960 GB
    • NVMe M.2 drive:
      • 480 GB
      • 960 GB
      • 1.92 TB

For a list of supported M.2 drives, see: Lenovo ServerProven website.

Storage expansion​

Storage expansion

  • Up to six hot-swap 2.5-inch SAS/SATA/NVMe drives

For a list of supported drives, see: Lenovo ServerProven website.

Expansion slots​

Expansion slots
  • PCIe riser
    • One PCIe riser on rear of node:
      • PCI Express 5.0 x16, HH/HL (single width)
    • PCIe expansion slot can support up to 75 watt PCIe adapter.
  • OCP module
    • One OCP module slot

Graphics processing unit (GPU)​

Graphics processing unit (GPU)
  • Up to one 75-watt low-profile GPU

For a list of supported GPUs, see: Lenovo ServerProven website.

Integrated functions and I/O connectors​

Integrated functions
  • Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote drive capabilities.
  • One XCC system management port (10/100/1000 Mbps RJ-45) to connect to a systems-management network. This RJ-45 connector is dedicated to the Lenovo XClarity Controller functions.
  • Rear connectors:
    • A group of two or four Ethernet connectors on OCP Ethernet adapter
    • One Mini DisplayPort connector
    • One XCC system management port (10/100/1000 Mbps RJ-45)
    • One USB 3.2 Gen 1 connector
    • One USB 2.0 connector with Lenovo XClarity Controller (XCC) system management
Note
The maximum video resolution is 1920 x 1200 at 60 Hz.

Network​

Network
  • Two or four connectors on the OCP 3.0 module

RAID adapter​

RAID adapter
Hardware RAID 0, 1, 10, 5, 50, 6, 60, 1 Triple, 10 Triple
  • ThinkSystem RAID 9350-8i 2GB Flash PCIe 12Gb Internal Adapter (supports flash power module)
  • ThinkSystem RAID 5350-8i PCIe 12Gb Internal Adapter
  • ThinkSystem RAID 540-8i PCIe 12Gb Internal Adapter

For more information about the supported RAID/HBA adapters, see Lenovo ThinkSystem RAID Adapter and HBA Reference.

Host bus adapter​

Host bus adapter
  • ThinkSystem 440-16e SAS/SATA PCIe Gen4 12Gb HBA

For more information about the supported RAID/HBA adapters, see Lenovo ThinkSystem RAID Adapter and HBA Reference.

System fan​

System fan

Four 4056 fans (40 x 40 x 56 mm)

Minimal configuration for debugging​

Minimal configuration for debugging
  • The following minimal configuration is required for the node to start:
    • One processor
    • One memory module in DIMM slot 6
    • One power supply in PSU slot 1
    • One boot drive, M.2 or 2.5-inch drive, and RAID adapter if configured (If OS is needed by debugging)
    • Four system fans

Operating systems​

Operating systems
Supported and certified operating systems:
  • Microsoft Windows Server
  • VMware ESXi
  • Red Hat Enterprise Linux
  • SUSE Linux Enterprise Server
References: