Skip to main content

Power distribution board cable routing

Follow instructions in this section to route the cables for the power distribution board.

Note

  • Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n

  • When routing the cables, make sure that all cables are routed appropriately through the corresponding cable guides and cable clips.

Figure 1. Cable routing for the power distribution board
Cable routing for the power distribution board

From (system board)

To (power distribution board)

Cable
1Node sideband connector1PDB sideband connectorSideband 2x15 to sideband 2x15 (180 mm)
2P12V AUX power connector2PDB P12V AUX power connectorPower 2x6 to power 2x6 (200 mm)