Skip to main content

Resolving suspected power problems

Power problems can be difficult to solve. For example, a short circuit can exist anywhere on any of the power distribution buses. Usually, a short circuit will cause the power subsystem to shut down because of an overcurrent condition.

Complete the following steps to diagnose and resolve a suspected power problem.

  1. Check the event log and resolve any errors related to the power.
    Note
    Start with the event log of the application that is managing the solution. For more information about event logs, see Event logs
  2. Check for short circuits, for example, if a loose screw is causing a short circuit on a circuit board.
  3. Remove the adapters and disconnect the cables and power cords to all internal and external devices until the solution is at the minimum configuration that is required for the solution to start. See Enclosure specifications to determine the minimum configuration for your solution.
  4. Reconnect all ac power cords and turn on the solution. If the solution starts successfully, reseat the adapters and devices one at a time until the problem is isolated.

If the solution does not start from the minimum configuration, see Power supply LEDs to replace the components in the minimum configuration one at a time until the problem is isolated.