Skip to main content

Install a DIMM comb

Use this information to install a DIMM comb.

About this task

Attention

Procedure

Align the DIMM comb with the slots and insert it into the chassis.
Figure 1. DIMM comb installation
DIMM comb installation
After you finish

  1. Reinstall the tray cover (see Install the tray cover).

  2. Reinstall the tray (see Install a DWC tray in the enclosure).

    Note
    For safety, use the lift tool to install the tray into the rack.
  3. Connect all required external cables to the enclosure.
    Note
    Use extra forces to connect QSFP cables to the enclosure if Mellanox ConnectX-6 adapters are installed.

  4. Check the power LED on each node to make sure it changes from fast blink to slow blink to indicate all nodes are ready to be powered on.

Demo video

Watch the procedure on YouTube