Skip to main content

Power Restore Policy

When Power Restore Policy is enabled as Restore, FPC remembers the latest node power status and recovery the node to the power status it was before AC is abruptly lost.

Figure 1. Power Restore Policy
Power Restore Policy
Power Restore Policy: Determines the mode of operation after loss of power.

  • Always off:

    Node remains off upon power restore.

  • Restore;

    Node restores to the previous state that was before power failed.

  1. Check the boxes of the nodes that needed to enable power restore policy or uncheck the boxes to set policy to always off after power recovery.

  2. Click Apply to activate the setting.

    Note

    • Power restore policy changed within 1 minute before AC lost might not be recovered due to design limitation.

    • Nodes ON/OFF state change within 1 minute before AC lost might not be recovered due to design limitation.