Parts list
Use the parts list to identify each of the components that are available for your solution.
Go to Lenovo Data Center Support and navigate to the support page for your solution.
Click .
Enter the serial number to view a list of parts for your solution.
Enclosure components
Figure 1. Enclosure components
The parts listed in the following table are identified as one of the following:Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your solution.
Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.
Consumable and Structural parts: Purchase and replacement of consumable and structural parts (components, such as a cover or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
Table 1. Parts list Index Description Tier 1 CRU Tier 2 CRU FRU Consumable and Structural part For more information about ordering the parts shown in Figure 1:
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
1 6U enclosure assembly √ 2 Lift handle √ 3 Manifold assembly √ 4 Drip sensor assembly √ 5 Fan and power control module module √ 6 Power supply √ 7 Fan module filler √
DWC tray components
Figure 2. DWC tray components
Table 2. Parts list Index Description Tier 1 CRU Tier 2 CRU FRU Consumable and Structural part For more information about ordering the parts shown in DWC tray components:
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
1 Tray cover √ 2 Water loop √ 3 Quick connects √ 4 Quick connect plug covers √ 5 Air baffle √ 6 Power distribution board √ 7 Trusted Cryptographic Module (TCM) √ 8 System board √ 9 M.2 drive (42 mm and 80 mm) √ 10 M.2 backplane √ 11 M.2 retainer clip √ 12 DIMM cover √ 13 DCPMM √ 14 DIMM √ 15 Processor √ 16 Processor clip √ 17 Fabric processor √ 18 Fabric processor clip √ 19 Drive cage √ 20 2.5-inch drive (15mm) √ 21 2.5-inch drive (7mm) √ 22 PCIe riser-card assembly √ 23 CX5 EDR adapter √ 24 Retaining clamp √ 25 OPA adapter √ 26 IFT adapter √ 27 Front cross brace √ 28 DWC tray release latches √ 29 Blank bezel filler without perf holes √ 30 Blank bezel filler with perf holes √ 31 DWC tray √ 32 Water loop carrier √ 33 Rear cross brace √ 34 CMOS battery (CR2032) √