Skip to main content

Rear view

The rear of the server provides access to several components, including the power supplies, PCIe adapters, serial port, and Ethernet port.

Rear view of the server

Figure 1. Rear view - 12V power distribution module (PDM)
Rear view - 12V power adapter model
Table 1. Rear view - 12V power adapter model
1 WLAN Antenna connectors (available only when M.2 WLAN module is installed)4 USB 2.0 connectors
2 RS-232 port (RJ-45)5 Power connector 1
3 LTE Antenna connectors (available only when M.2 LTE module is installed)6 Power connector 2
Figure 2. Rear view - -48V power distribution module (PDM)
Rear view - -48V power adapter model
Table 2. Rear view - -48V power adapter model
1 WLAN Antenna connectors (available only when M.2 WLAN module is installed)5 Vin- terminal
2 RS-232 port (RJ-45)6 Vin+ terminal
3 LTE Antenna connectors (available only when M.2 LTE module is installed)7 GND terminal
4 USB 2.0 connectors8 Power connector

Rear I/O fillers

Install the I/O fillers when the connectors are not used. The connectors could be damaged without proper protection of the fillers.

Figure 3. Fillers
Fillers
Table 3. Fillers
1 Antenna cover x4 (If no antennas are installed, use antenna port fillers. See Front view.)3 USB filler x2
2 RJ-45 filler4 Power connector filler