Pular para o conteúdo principal

Marine certificated models

Information of SE360 V2 marine certificated models.

ThinkEdge SE360 V2 has been issued with EU RO MR (European Union Recognized Organization Mutual Recognition) type approval certificate by Det Norske Veritas® (DNV®). The certification only applies to specific preconfigured models of SE360 V2. See ThinkEdge SE360 V2 Product Guide on Lenovo Press website for more information of preconfigured models.

Environmental specifications​

  • Extended operation temperature (with limited configuration supported by marine certificated models):
    • Server on: -20°C to 65°C (-4°F to 149°F), to 70°C for 16 hours (158°F)
  • Shock and vibration specifications:
    • Shock: 5G/15ms, 20 times shock in each axis with 3 axes
    • Vibration: Q-factor<5; Amplification<10; 90 mins in each resonance frequency

Technical specifications​

Table 1. Technical specifications of marine certificated models
PartsSpecifications
Processor One-socket Intel® Xeon® D-2752TER with 12 cores
MemoryUp to 4x 32GB TruDDR4 3200 MHz (2Rx4 1.2V) RDIMM Extended Temperature
M.2 Drives
  • M.2 boot drives: Up to two NVMe M.2 Extended Temperature drives
  • M.2 storage drives: Up to eight NVMe M.2 Extended Temperature drives
Integrated functions and I/O connectors
  • Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote drive capabilities.
  • Front I/O connectors
    Note

    For the models without wireless module, install the Bluetooth antenna filler to the corresponding slot for proper operation. The Bluetooth antenna filler is in the material box. See Front view to locate the Bluetooth antenna filler.

    • One XCC system management port (10/100/1000 Mbps RJ-45) on the rear to connect to a systems-management network. This RJ-45 connector is dedicated to the Lenovo XClarity Controller functions.
    • Two USB 3.2 Gen 1 (5 Gbps) Type-A connectors
    • One USB 3.2 Gen 1 (5 Gbps) Type-C connector with display support
    • One USB 2.0 Type-C connector with Lenovo XClarity Controller management
    • Two 2.5GbE RJ-45 connectors
    • Depending on the model, one of the following groups of Ethernet connectors:
      • With 10/25GbE I/O module board installed: four 10/25GbE SFP28 connectors
        Note
        The transmission speed of SFP28 connectors could be 10 Gbps or 25 Gbps, depending on the processor selected. Processors with at least 16 cores support transmission speed of 25 Gbps.
      • With 1GbE I/O module board installed: four 1GbE RJ-45 connectors

  • Rear I/O connector

    • One RJ-45 RS-232 serial console connector for OS/BIOS or XCC
Storage controllerIntel VROC NVMe RAID
System fanTwo 80 mm x 80 mm x 56 mm dual-rotor fans with rear-to-front air flow direction
Electrical inputSingle 500W (230V/115V) AC power source input
Minimal configuration for debugging

  • One DRAM memory module in DIMM slot 1

  • AC power source input

  • One 2280 NVMe M.2 drive in Slot 1 on the I/O module board

  • Two system fans

Operating systems

  • Microsoft Windows Server 2019 or higher

  • Microsoft Azure Local

  • VMware ESXi 7.0 U3 or higher

  • Red Hat Enterprise Linux 8.6 or higher

  • SUSE Linux Enterprise Server 15 SP4 or higher

  • Ubuntu Server 20.04 LTS 64-bit or higher

References:

Mounting option​

The mounting option supported by marine certificated models is wall mount only.

The reinforced cover of wall mount configuration is designed for marine certificated models.

To install the reinforced cover, see Install a node to the wall or the ceiling.