Install a RAID super capacitor module

Use this information to install a RAID super capacitor module.

Read the installation Guidelines

Power off the server for this task

ATTENTION: Static Sensitive Device Ground package before opening

Before installing a RAID super capacitor module, touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.

To install a RAID super capacitor module, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

1. Note the orientation of the RAID super capacitor module. Then, gently press the tab on the air baffle as shown and install the RAID super capacitor module onto the air baffle at the same time.
   Figure 1. RAID super capacitor module installation
   

   

   
   
2. Connect the RAID super capacitor module to the RAID adapter using an extension cable.
   Figure 2. Connecting the RAID super capacitor module to the RAID adapter