Backplane for four 3.5-inch hot-swap drives
Use this section to understand the connectors on the backplane and internal cable routing for server models with four 3.5-inch hot-swap drives.
Figure 1. Connectors on the backplane for four 3.5-inch hot-swap drives
| 1 SAS 0 connector | 2 Power connector |
Figure 2. Cable routing for server models with four 3.5-inch hot-swap drives
| Cable | From | To |
|---|---|---|
| 1 Power cable | Power connector on the backplane | Backplane power connector 1 on the system board |
| 2 SAS signal cable | SAS 0 connector on the backplane | HBA/RAID adapter:
|
Give documentation feedback