Skip to main content

Backplate for four 3.5-inch simple-swap drives

Use this section to understand the internal cable routing for the server model with four 3.5-inch simple-swap drives.

Figure 1. Cable routing for server models with four 3.5-inch simple-swap drives
Cable routing for server models with four 3.5-inch simple-swap drives

The simple-swap drive backplate assembly comes with a power cable and a SATA signal cable.
FromTo
1 Power cable of the backplate assemblyBackplane power connector 1 on the system board
2 SATA signal cable of the backplate assemblySATA 0-3 connector on the system board