Install the TCM/TPM adapter (for Chinese Mainland only)

Use this information to install the TCM/TPM adapter.

Read the installation Guidelines

Power off the server for this task

ATTENTION: Static Sensitive Device Ground package before opening

Before installing the TCM/TPM adapter, touch the static-protective package that contains the new TCM/TPM adapter to any unpainted surface on the outside of the server. Then, take the new TCM/TPM adapter out of the package and place it on a static-protective surface.

To install the TCM/TPM adapter, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

1. Locate the TCM/TPM connector on the system board.
2. Insert the TCM/TPM adapter into the TCM/TPM connector on the system board.
   Note

   • Carefully handle the TCM/TPM adapter by its edges.

   • Your TCM/TPM adapter might look slightly different from the illustration.

   Figure 1. TCM/TPM adapter installation