FQXSFMA0012L : The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2] at address [arg3]. [arg4]

Parameters​

[arg1] Legacy PFA threshold reach, "High", "Low".

[arg2] DIMM Silk Label, 1-based

[arg3] Address of the system where error occurred

[arg4] DIMM info (S/N, FRU and UDI.), e.g. "739E68ED-VC10 FRU 0123456"

Severity​

Warning

User Action​

Complete the following steps:

1. Reseat affected DIMM.
2. Check Lenovo Support site for an applicable service bulletin or firmware update that applies to this memory error.
3. Swap the DIMM to another known good location.
4. If the problem persists, collect Service Data logs and contact Lenovo Support.
   Note

   Lenovo highly recommends using feature called Advanced Memory Test (AMT) during the next maintenance window within Lenovo XClarity Provisioning Manager (LXPM). Running AMT has been shown to reduce the occurrence of future memory errors. https://download.lenovo.com/servers_pdf/lenovo-amt-on-thinksystem.pdf
   Note

   The solution for this error may involve a system board replacement. If TPM encryption has been enabled, back up TPM Encryption Recovery Key.