Skip to main content

Remove the RAID super capacitor module on the riser

Use this information to remove the RAID super capacitor module on the riser.

About this task

Attention

  • Read Installation guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

  1. Remove the top cover. See Remove the top cover.
  2. Disconnect the cable of the RAID super capacitor module.
  3. Remove the riser assembly. See Remove a riser assembly.
  4. Remove the RAID super capacitor module from the riser.
    Figure 1. Removal of the RAID super capacitor assembly from the riser
    Removal of the RAID super capacitor module from the riser

    1. Rotate the latch on the riser bracket to the open position.
    2. Remove the RAID super capacitor assembly from the riser.
    3. Open the retention clip on the holder of the RAID super capacitor module.
    4. Take the RAID super capacitor module out of the holder.

After you finish

If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use any packaging materials that are provided.