Power problems can be difficult to solve. For example, a short circuit can exist anywhere on any of the power distribution buses. Usually, a short circuit will cause the power subsystem to shut down because of an overcurrent condition.
Complete the following steps to diagnose and resolve a suspected power problem.
- Check the event log and resolve any errors related to the power.
Start with the event log of the application that is managing the server. For more information about event logs, see
Event logs. - Check for short circuits, for example, if a loose screw is causing a short circuit on a circuit board.
- Remove the adapters and disconnect the cables and power cords to all internal and external devices until the server is at the minimal configuration for debugging that is required for the server to start. To determine the minimal configuration for your server, see
Minimal configuration for debugging
in Technical specifications. - Reconnect all AC power cords and turn on the server. If the server starts successfully, reseat the adapters and devices one at a time until the problem is isolated.
If the server does not start from the minimal configuration, replace the components in the minimal configuration one at a time until the problem is isolated.