2.5-inch/3.5-inch drive backplane (power)
This section provides information for backplane power connections.
Front BP
Figure 1. 3.5''
| From | To |
|---|---|
| 1 Power 1 connector on backplane | Front backplane 1 power connector on the system board |
| 2 Power 2 connector on backplane | Front backplane 2 power connector on the system board |
Figure 2. 2.5''
| From | To |
|---|---|
| 1 Power connector on backplane 1 | Front backplane 1 power connector on the system board |
| 2 Power connector on backplane 2 | Front backplane 2 power connector on the system board |
| 3 Power connector on backplane 3 | Front backplane 3 power connector on the system board |
Mid BP
Figure 3. 3.5''
| From | To |
|---|---|
| 1 Power connector on backplane 5 | Power connector on riser 1 or 2 assembly |
Figure 4. 2.5''
| From | To |
|---|---|
| 1 Power connector on backplane 5 and backplane 6 | Power connector 1 and power connector 2 on riser 1 or 2 assembly |
Rear BP
Note
The illustration shows the cable routing for the 4 x 2.5-inch rear drive backplane, routing for the other rear drive backplanes is similar.
Figure 5. 2.5''/3.5''
| From | To |
|---|---|
| 1 Power connector on backplane 4 | Power connector on riser 1or 2 assembly |
Give documentation feedback