Remove the OCP 3.0 Ethernet adapter
Use this information to remove the OCP 3.0 Ethernet adapter.
About this task
CAUTION
Make sure that all server power cords are disconnected from their power sources before performing this procedure.
Attention
Read Installation Guidelines to ensure that you work safely.
Power off the server and disconnect all power cords for this task.
Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.
Procedure
Remove the OCP 3.0 Ethernet adapter.
Figure 1. OCP 3.0 Ethernet adapter removal
Loosen the thumbscrew that secures the card.
Pull out the OCP 3.0 Ethernet adapter.
After you finish
Reinstall a new OCP 3.0 Ethernet adapter or a card filler.Demo video
Give documentation feedback